At rehearsal yesterday my JCM2000 DSL 100 suddenly went really loud and then silent. All the valves are lit up and all the lights are on...No blown fuses but no sound? Tested that the cab was ok and it is ...So it's definitely the amp . Any suggestions what it may be folks? fyi I was running it on t...

No keeping head as is ....Charge was £100 but money well spent I think

Picked up my newly re-finished 1960A cab last Friday prior to a gig on Saturday...What do you think of the job that they did printing up our artwork?

Hi ...I have a chance of picking up a cheap 1960AX cab fitted with the 25W Greenbacks....I'm concerned that if I run this with a 100 watt head there's a possibility of damaging the speakers.. Some guitar shop ads recommend using a powerbrake with a 100w head. Do I need to worry about this , particul...

Thanx I didn't realise this...I thought they either worked or they didn't. I had no idea a failing plate could effect the tone ! And your post wasn't to clear on this. Are you suggesting that I need to check the Ohms to clarify if the plate is failing?

Thanx Blues & Cues but I'm a little confused. The cab is working (and loud) it's just that it sounds very trebly when compared to the 1936 V cab ( which has different speakers Vintage V30 celestions)....??????? You seem to be telling me how to test ohm of cabs and how to find out if the speakers are...

I have a 1936 V cab which I keep for bedroom use with my JCM2000 DSL and Boss ME-80. Recently I bought a 1960A cab to use for gigs which is a JCM900 series. My worry is that the 1960A sounds really quite thin and trebly compared to the 1936 which is almost a bit too bassy. I have to change all my am...

Thanx you guys but can I suggest you re read my post....I'm not mismatching ohms....both cabs w/be 8 ohms ....so the amp s/be on 4

Hi Guys wondered if I could tap the collective knowledge of the forum please? I have a JCM 2000 DSL 100 watt amp together with a 19363V 2 by 12 cab (for home use) and a 1960A 4 by 12 for gigging... Because the 1960A is very directional I thought it might be nice to set the 2 by 12 cab on the other s...

Thanx sikter sensible advise

I'm looking at buying a 1960A cab for my JCM2000 DSL 100 Watt head ( I currently have a 1936V ) and see that it has both 4 or 16 ohm mono inputs....Is there any reason to use one or the other as my head has 16,8 and 4 ohm options as I'm sure you're well aware or as I suspect you'll say there is no d...

Thanx to all...I isolated the amp to a socket on its own (previously shared with another amp on an extenesion lead) and also now have my Boss ME-80 going into a different double wall socket which it now shares with my Bose I player docking station that I jam with. Played an hour and a half last nigh...

Thanx Mats...are you saying that the valves can function ok but still be "bad" ? Not sure I understand...or do you just mean that any valve could fail quickly because of a manufacturing fault for example.

Would be a bit disappointed if Marshall installed valves failed in four months ! But hear what you're saying. However I would have expected to hear a change if were the case? However have just phoned Marshall who said it could be an issue with house electrics and to try in another location to see if...

all the valves were replaced at service