I was play'n my new used CSJTM145 and I thought I wonder if I could run a patch cord from the low input to my JMP1C and it worked great, both amps play'n at the same time sounded great, then I looked around and saw the SL5 has the same 2 inputs so I patched the CSJTM145 to the SL5 in 1 watt mode the...

I received the amp yesterday and I have to say Bill is a great guy ! Everything was great. Thx

Yes you can, being that the amp is not a true stereo 2 separate amps you may get some cancelation or phasing problems with the sound as they are mixed together

Thanks! That brings up the next part of this. I know I'm not the only one who thinks it be super cool to have a 1x12 extension cab. I'd love to hear some results of speaker combos. Also I wish marshall would make a 112 that would stack under the dsl40c. And wish I had million dollars and a pony... ...

YJ have been around for a while THD originally made them and sold it off. I have them. There are several models this mode is new it's not for EL84/6BQ5. You do need to get the right model as some are for fixed/adjust and some for cathode bias. The one for the SL5 just rearranges the pins so an EL84 ...

When mine failed, power tube went and it also blew the small fuse inside the amp

In the case of the sl5 you can go straight to the on, just like the class5 and the 1 watt'rs. Use the standby if you are step'n out of the room for a few and come'n back to play, then when your done you can go straight to off.

MF also has this listed on Ebay and says only 5 available. GC still show them as 1299. Seems like a great deal

I think it's a JJ

Mats A wrote:My brother has a multimeter so he should be able to adjust the bias om my JCM 2000 DSL 100. Isn't that all you need on the old DSL?

That's it, set it to mV and have him watch the Euro Tube vid posted above.

I don't know if I would. Are the power tubes and PI tube balanced. If not and the amp uses 2 bias controls then you could be out of wack

Maybe the 2 15watters are close both 2 channel 6V6 amps but the DSL has more pre amp tubes. As for the 40 watters they are not even close

I need to correct myself. I have the C5 head and the SL5 combo. Today I put a sound meter in front of the SL5 and switched between it and the C5H through the SL5 speaker. The SL5 is just as loud if not more than the C5H based on the meter. The clean channel is a little lower than the C5H and the OD ...

I have both also and the C5 is louder, the SL5 clean channel can't, very low. The gain channel is louder but not as much as the C5. I've never used with a band, couldn't see it, unless mic'd.

I fine it to be fuller sounding with the back off and the greenback. I've also switched the tube to a 6CA7 which gives a meater sound. Last night I dropped in a VHT tube converter and put in a EL844 WOW! Very responsive, really sounds like a hot rodded JCM800 Is this the tube converter you used ? h...