Upgraded my Bass amp and man what a ass kicker, I am amazed how loud this amp can get with only a NEO 2x10 cabinet. Has that real warm tube sound but the eq on the amp is amazing as you can get those brutal mids really cooking. The built in gate and compressor also work real well.
I don't know how many of you guys also play bass but I am very happy with the amp and cabinet setup.
Here is the head front and back, I also have a rack mount frame for it.
- RMS 8 Ohms: 300w, RMS 4 Ohms: 500w, RMS 2 Ohms: limited
- 8 ohms Dynamic Peak: 600w
- 4 ohms Dynamic Peak: 1000w
- Output Mode: High Efficiency CLASS D technology
- Power Supply: High Efficiency High Frequency switching
- Frequency Response: +/- 0.5 dB 20 Hz - 20 kHz, +/- 1.5 dB 10Hz - 40 kHz
- THD: 0.1% @ 50% output
- 1% 20-20 kHz @ 90% output
- Damping Factor: >300
- Preamps: Three CLASS A
- Passive/Active Input: 10 dB gain switch - accommodates all basses
- Preamp Tube: 12AX7 swtichable in/out
- Bass/Treble: +-10 dB at 100 Hz and +-12 dB at 8k Hz
- Contour control: Flat to -126 dB at 400 600 Hz
- 1 Mid Parametric: +- 10 Db sweepable 100 to 800 Hz
- 2 Mid Parametric: +- 10 Db sweepable 800 to 3k Hz
- Graphic Equalizer: 9 band +- 10 Db @ 63, 120,250,500,1k,2k,4k,8k,16k
- Compressor/Limiter: up to 30 dB – convenient one knob control
- Direct Out: - 50 to +4 dBV adjustable, Balanced 600 ohms
- Effects Loop: -10 dBV In/Out buffered at 10k to keep source constant
- FS22 Footswitch: Graphic EQ on/off, Direct Out MUTE on/off
- Soft Start: gradually turns the amp on to prevent surges
- Speaker Protection: protection circuit immediately disconnects your speakers
- Over-Current: protected, Under-Voltage protected, Thermal protected
And here is the cabinet, don't let those two tens fool you the Neodymium drivers will shake the house.