Vox 1902 Repair

Postby **Anitoli** » 06 Jun 2013, 06:00

Pull the battery out do you mean disconnect or just pull it out from the chassis?

Postby **sikter** » 06 Jun 2013, 06:52

Anitoli wrote:Pull the battery out do you mean disconnect or just pull it out from the chassis?

I think he is regarding to disconnecting... that sound reminds me of buffer getting "empty"... or I just heard wrong

Postby **Anitoli** » 06 Jun 2013, 07:06

Just curious as im not sure how the batterys are connected i/e two seperate snap on connectors or two batterys in one connector. If there is an issue with one battery connector being open, this could be the problem as well not enough voltage.

Postby **rineanna** » 13 Jun 2013, 08:31

Hi forgot about this thread with all the people from the MF coming over...The batterys are 2 snap on connectors...I've attached some pics of the topside of the PCB....Pic no. 2 is the diode that I clipped

Postby **Anitoli** » 18 Jun 2013, 02:13

Ok, so are you getting this to power up just no signal going through?

Postby **rineanna** » 18 Jun 2013, 12:05

I'm pretty sure it's powering up all around the board as I checked with the meter. Still no sound when switched on though

Postby **rineanna** » 18 Jun 2013, 12:06

I also forgot to mention that the places I checked on the board are only getting 9v not 18.....I'm sure this is part of the problem

Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Re: Vox 1902 Repair

Who is online