Page 1 of 1
A1M Volume for 1959RR
Posted: 05 Nov 2016, 05:18
by munkyver
Hi Guys,
Where can I buy an A1M potentiometer? it needs to be for a 6mm mounting hole.
Can you direct me to any website that you know that sells them.
I actually bought a CTS online but it is for a 9.4mm mounting hole so it did not fit.. now i am thinking if I will just make the mounting hole of my amp bigger to accommodate the 9.4mm
Cheers,
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 05:27
by Anitoli
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 05:34
by munkyver
Thanks Anitoli!!! I will check them out now...
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 05:43
by munkyver
found one from the 3 website that you gave Anitoli but it has been discontinued:
http://www.guitar-parts.com/catalog/mar ... -potm00012
I have contacted the marshall dealer here in Singapore and the guy over the phone doesn't have a clue on what it is. I told him for a 1959RR then he said sorry that is an old model.. 1959 heheheheh what a ....
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 06:14
by Anitoli
Can you post a good pics of the pot? Might be able to find a replacement from some of the large parts distributors.
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 08:03
by munkyver
Hi Anatoli
Thanks again for helping.
This is the pot
http://www.guitar-parts.com/catalog/mar ... -potm00012
it is the same with the 1959HW.
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 08:03
by munkyver
The shaft is thinner.. 6mm instead of the CTS 9.4mm
Re: A1M Volume for 1959RR
Posted: 05 Nov 2016, 08:47
by Anitoli