Another great product from the guys at Radial Engineering.
Connect one amplifier output to two speaker cabinets Can use in series or parallel configuration Compact and completely passive, no need for power Additional line output with level control
The Cab-Link provides a simple and compact solution for players who have a single speaker output on their amplifier but want to connect two cabinets simultaneously.
Completely passive with no need for power, the Cab-Link combines two cabinets in either series or parallel configuration, which allows their total impedance to match the output impedance of the amp. Both cabinets are connected via speaker cables to outputs A and B and an easy-to-use guide on the top of the Cab-Link lets you know which input to connect your amp to, depending on the impedance ratings of your cabinets. For example, if you have two 8 Ohm speaker cabinets they can be combined in series for a 16 Ohm amplifier or in parallel for use with a 4 Ohm amp. The output of your amplifier connects to one of two input jacks; use either the series or parallel input depending on which configuration is required.
The Cab-Link also features a line out which provides additional functionality and can be used to feed another amplifier or an effects unit. A dedicated level control allows for fine-tuning of this output.
1498077923000_IMG_817549.jpg (71.22 KiB) Viewed 159 times
1498077923000_IMG_817553.jpg (26.58 KiB) Viewed 159 times