Marshall JCM2000 DSL 100 JCM2-60-00

[Mark Bozzell]

Hi, I have a Marshall JCM2000 DSL 100watt. A couple of resistors need to be replaced. I've looked at the schematics for the JCM2-60-00 board, but cannot make out the values for the R6 and R9 resistors. The color codes are unreadable on the actual resistors, and the schematics I have found are unreadable . I believe R6 is 10M and R9 a 10K? Does that sound right? And what wattage are they rated at?
Thanks for any help! - Mark

[dju]

i found a gut shot images that should help with that:
R9 https://images.reverb.com/image/upload/ ... ay5syc.jpg
R6 https://images.reverb.com/image/upload/ ... nfbi2r.jpg
copied from a reverb listing for power pcb board that was for sale.

[SteveD]

I believe R6 is 10M and R9 a 10K? Does that sound right? And what wattage are they rated at?
Thanks for any help! - Mark

R6 is 10M 1/4W
R9 is 10K 1W