TSL 60 output transformer pinout

[frets70]

I have a TSL 60 head I have been going through, got it in a trade---it didn't work, had no output--

Replaced preamp tubes and Power tubes with known good ones---got sound although very low and a slight hum overall

replaced R49 (1k 5w) got fairly good volume--but have to run at 7-8 on master and channel for gig levels

Power seems like a 25 or 30 watt rather than 60


OT and PT are original, have played the amp for maybe 9 hours--7 of which were gig levels and have had no problem, checked bias over and over and it is stable at 79 with no drift on JJEL34L

[Anitoli]

Is there any numbering by the pins or on the white plastic part that the pins come out of that match the diagram?

[frets70]

I didn't see any unless they are marked on the side, and I need to take the OT out to see them

[frets70]

That pinout pic was actually for a TSL100, I found the right one for the 60 BUT the OT died today, starting over!