40th birthday present.

[Alpeggio]

Wonderful amp, congrats. I knew someone who when using it at home, used a blackstar tube overdrive in front and the amp on low. Sounded great.
Al

[michael_dba]

You got yourself one badass amp!

[ClassicRock88]

Congratulations! I would love to hear a clip! Sounds like a neat amp. Happy birthday.

[mkstylee]

do they look like this?

Yes that's em just badged marshall

[mkstylee]

Thank you everyone, not much clean headroom in fact none, but cleans up good with guitars volume control, very happy.

[Mats A]

Great choice. From what year is it? Tried it with an attenuator?

[mkstylee]

Great choice. From what year is it? Tried it with an attenuator?

Its 2004 model and yes I use it with a jattenuator too loud for home use without it. Want another weber mass when funds allow I like the high boost switch on them the jettenuator looses a lot of the highs.

[Mats A]

How low can you go in volume? I borrowed a Weber Mass and tried it with a JCM 2000 DSL 100W and it was still too loud at the lowest volume. Also it started to come smoke from the Weber Mass and a bad smell. Later i red that was as it should on a newer Weber Mass.

[Mike_LA]

Hummm, those tube look a lot like, Gasp, JJs except for the missing extra top plate.

[mkstylee]

How low can you go in volume? I borrowed a Weber Mass and tried it with a JCM 2000 DSL 100W and it was still too loud at the lowest volume. Also it started to come smoke from the Weber Mass and a bad smell. Later i red that was as it should on a newer Weber Mass.

I can get down to nothing but don't like to run that way as it puts too much strain on the tubes ,the amp itself and the attenuator I run it wide open it still takes a good amount of volume off just wish I could get some highs back, you say a 2000 DSL I only use a attenuator with non master amps as that's what the master if for ,Still prefer the weber ,in fact I still prefer no attenuator but my neighbours and the police don't.

[michael_dba]

There are some really good post phase inverter master volume circuits now. No need to floor the power tubes like with an attenuator. I am very happy with the MV Sligo installed on my 1959SL.

[ClassicRock88]

Weber MASS 150 is what they told me I should get to run 100 watt amps. I think that an attenuator with a little bit of a cut from the PPIMV would likely be a god balance.

[Mats A]

It works on any valve Marshall. But i had a Weber 100 and you couldn't get down to zero volume with it. Isn't there a knob and some switch to attenuate? I have a Marshall Power Brake and the lowest on that is loud at home.

[P A U L]

Hummm, those tube look a lot like, Gasp, JJs except for the missing extra top plate.

http://i00.i.aliimg.com/wsphoto/v0/1165 ... -12ax7.jpg

Nah, definitely Shuquang....

[michael_dba]

Hummm, those tube look a lot like, Gasp, JJs except for the missing extra top plate.

http://i00.i.aliimg.com/wsphoto/v0/1165 ... -12ax7.jpg

Nah, definitely Shuquang....

That's what I was thinking....Shug 12AX7B