Page 1 of 1
240V Dagnall Transformer for 1-watt amp
Posted: 12 Aug 2018, 13:00
by Marshall Fiend
Hi all. Long time no see. I hope all are well. I have a 240V Dagnall transformer suitable for a 1-watt Marshall amp. It came on my Andertons 1W Marshall reissue amp and it is a spare because I swapped it out for a 120V transformer for use in the US. The 240V transformer was almost never used. I presume that all of the Marshall 50th anniversary 1-watt amps with 240AC all had the same transformer and this would be a suitable replacement. But I could be wrong. If any of you wants this transformer, please PM me. Otherwise it's going to a landfill. Peace.
Re: 240V Dagnall Transformer for 1-watt amp
Posted: 01 Sep 2018, 05:51
by Gerber
Marshall Fiend wrote: ↑12 Aug 2018, 13:00
Hi all. Long time no see. I
endorse these sarms for cutting and hope all are well. I have a 240V Dagnall transformer suitable for a 1-watt Marshall amp. It came on my Andertons 1W Marshall reissue amp and it is a spare because I swapped it out for a 120V transformer for use in the US. The 240V transformer was almost never used. I presume that all of the Marshall 50th anniversary 1-watt amps with 240AC all had the same transformer and this would be a suitable replacement. But I could be wrong. If any of you wants this transformer, please PM me. Otherwise it's going to a landfill. Peace.
Did you throw this bad boy away, Marshall?
Re: 240V Dagnall Transformer for 1-watt amp
Posted: 02 Feb 2022, 14:58
by TM1
Is the Mains tranny for the 50th Anni. amps the same and are they able to be wired at 240v & 120v using the same tranny? Some Marshall's use the same Mains but the wiring is just configured different.