Moderator: longfxukxnhair
You mean the led's? If so i have changed all my FS's to match the LED colors on the heads and they work fine.Mike_LA wrote:So now that I am in a holding pattern for a min, what are your thoughts on my other question,
"Would changing the diodes in the footswitch effect the circuit in any way?".
M
Ahh, good. That's what I thought but this happenned while the upgraded footswitch was in use for the first time with this unit.Anitoli wrote:You mean the led's? If so i have changed all my FS's to match the LED colors on the heads and they work fine.
Yes 3mm leds, though they are brighter than the oem red ones.Anitoli wrote:Did you use regular 3mm led's?
Just turn it on with everything hooked up the way it should be.Mike_LA wrote:
Ok Pete, I have the new ICs installed.
Just reinstall the board and fire it up or slowly dial it up on my rheostat and read the voltage where the transistor fried, or?
I think it was C407 but it took me by surprise and i was afraid of frying the new chips so I shut it down.Anitoli wrote:What capacitor was it?
Users browsing this forum: No registered users and 1 guest