Moderator: longfxukxnhair
I only use delay, chorus and reverb and find the effects to be great quality and very tweakable. With the JMD they are all built in and there is no need for any pedals which is great. Make sure you try the noise gate on the JMD it is top notch and again, if you can, engage the effects loop with the level around half way it will make some settings sound even better.rabies wrote:How good are the effects? I usually use the delay/chorus/reverb in my G Major (#27) w/ or w/o compression.
I dont use a jumper cable I just make sure the effects loop button is on and then turn the knob in the back about half way up. I dont know why, but it makes everything sound even better.Mpesta wrote:Noise5150,
Do you need to put a jumper cable between the effect send and return for this to work? I do this with my JSS combo to get that boost for solos.
Thanks,
Mike
Thats what caused my amp and many others to stop switching channels properly. I stopped doing this and the amp switches with no issues nownoise5150 wrote:I dont use a jumper cable I just make sure the effects loop button is on and then turn the knob in the back about half way up. I dont know why, but it makes everything sound even better.Mpesta wrote:Noise5150,
Do you need to put a jumper cable between the effect send and return for this to work? I do this with my JSS combo to get that boost for solos.
Thanks,
Mike
Users browsing this forum: No registered users and 2 guests