Moderator: longfxukxnhair
Yes that is the simple thing to do, but I think rcc wants the benefit of using one 2x12 for the crowd and the other as his monitorRiffraff wrote:Just use one cab with each head and you can use a simple A/B switch. I'm doing the same thing right now with my 2266 and a 1959SLP-RI. No noise, no popping and instant switching when I stomp on the pedal.
The voodoo is cool device for a multi amp set up. However, the problem here is that rcc want to have sound coming out of both 2x12s all the time and that sound supplied by one amp at a time.surfnorthwest wrote:I use a Voodoo Labs Amp switcher, it is a excellent piece of gear. The switcher allows for up to four different amps to be used individually or at the same time.
Simple take head 1 and hook it up to the cabinet you want and select the proper impedence, do this for amp 2 next. Then place the amp selctor as the last thing in your chain.
Guitar>effect boxes>Guitar input on Amp Slector>
then run a seprate cable to each head from the outputs of the amp selector. Fire up both amps and use the amp selectors footswitch to toggle between each amp or to run them together for a stereo effect. There is no added noise from this and no pops/clicks when changing. You also can adjust the output to each amp on the amp selector. IMO it is exactly what you are looking for.
Users browsing this forum: No registered users and 2 guests