Moderator: longfxukxnhair
The hum still occurs even if you place a patch cord from the send to the return, no pedal or rack unit in the chain.John 14:6 wrote:I had a hum through my JVM that I could not tack down so I ended up bringing my pedal board and JVM into the shop to see if the tech could get things figured out. The hum went away once he removed the batteries from the pedals on the board which still had batteries in them. I always figured that the batteries were being bypassed since my pedals were being powered by my Modtone power supply. The tech said that the batteries were still interfering with the circuit and causing the hum I was getting through my effects loop. Is there any chance that some of you guys could be having the same issue?
so this product solved the hum issue with your YJM100? If so, which model of the Ebtech did the trick?snark wrote:This Solved my issue: http://www.ebtechaudio.com/llsdes.html
But I am connecting to rack effects...
Sent you a pm on this...donbarzini wrote:so this product solved the hum issue with your YJM100? If so, which model of the Ebtech did the trick?snark wrote:This Solved my issue: http://www.ebtechaudio.com/llsdes.html
But I am connecting to rack effects...
Users browsing this forum: No registered users and 1 guest